þþþþþ
 ÝÛÛÛÞ
 ÝÛÛÛÞ  KEYBOARD - REPEATING/STUCK/NON-RESPONSIVE KEYS
 þþþþþ
 

STEP 1 : Get a bottle of PROPYL ALCOHOL. Buy a disposable plastic syringe 
         from your friendly neighbourhood chemist/medical shop.

STEP 2 : Spot Test - put a little drop of PROPYL ALCOHOL on any of the key 
         tops or plastic part of the keyboard and wait for some time.
         Then see if any damage like corrosion occurs. Normally it is very 
         safe but it is also quite possible that the plastic of your type of 
         keyboard might get corroded. If this is so then this TIP is NOT for 
         you. As a matter of fact I have not faced this corrosion problem 
         till now but you never know when some manufacturer might try to
         cut corners.

STEP 3 : Remove the KEYTOP of the problematic key with the aid of a small 
         flat screwdriver. You will notice a stem like thing known as 
         the plunger.

STEP 4 : Pull in a small amount of alcohol in the syringe. Then put the needle
         alongside the plunger and inject the alcohol in the base of the key.
         Now press and release the plunger several times.

STEP 5 : Repeat STEP 4 few times till the problem is solved. If the problem 
         is still not solved then it may mean that the Key has to be replaced.

NOTE : STEP 4 has to be done with the machine ON. The above TIP is only meant 
       for key problems due to dirt inside the Key.

ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ